Planetary Gear Reducer for Wheeled Vehicle Planetary Gearbox
NB602L2-25 NB602L2 NB606L2
Superior Performance
The replacement of the NBPG NB600L Serieswheel drive planetary gearbox is designed for self-propelled vehicles with hydraulic or electric motors. Available in a wide range of ratios, the gearbox allows the power system to operate at optimum efficiency. The NB600L planetary gear reducer for the wheeled vehicles has the capacity to drive whatever the type of machine with up to 2.5m of tire diameter and 50 tons each wheel. Thanks to the wide ratio range, there is a solution for any type of transmission and application. The manual declutch system can disengage the gearhead from the motor for emergency towing.
Key Features
1. Output torque range: 1000-60000 N.m
2. Gear ratios: i=5.3-142
3. Support: the gearbox has rotating housing flanges to fit the wheel
4. Applicable motors: axial piston hydraulic motors, hydraulic orbit motors or others
5. Hydraulic motor options: pressure relief valve, over-center valve
6. Bearing: robust bearing system absorbing the forces exerted by the ring gear
7. Brake: hydraulically released parking brake
8. Others: NB600L Series wheel drives with manual disconnect application
9. Large radial and axial load capacity due to the use of strongly tapered roller bearings.
10. Reliable oil seal protection, designed according to our field experience.
11. Universal and SAE input direct mounting flanges
12. The units are designed for their direct mounting into the wheel rims.
13. Technical data and installation dimension of NB600L Series gearbox are the same as those of Rexroth GFT…W Series and Bonfiglioli 600 Series, so these three can be used interchangeably.
edited by CX
Track drives Type | Max. torque N.m | Range of ratios (i) | Max. Input speed (rpm) | Braking torque (N.m) |
NB601 L1A | 1750 | 5.77 | 1000 | 450-600 |
NB603 L2A | 4000 | 19-23-32-40 | 3000 | 210 |
NB603 L2B | 4000 | 19-23-32-40 | 3000 | 210 |
NB602 L2 | 5000 | 12.4-25.8 | 3000 | - |
NB605 L2 | 7000 | 22-27-30-42-53 | 3000 | 220-310 |
NB606 L2, L3 | 12000 | 30-35-43-68-79 | 3000 | 300-800 |
NB607 L2, L3 | 17000 | 33-75-108 | 3000 | 300-600 |
NB609 L2, L3 | 23000 | 33-142 | 3000 | 300-600 |
NB610 L2, L3 | 30000 | 20-111 | 3000 | 300-800 |
NB611 L2, L3 | 36000 | 41-47 | 3000 | 300-800 |
NB613 L3 | 45000 | 108 | 3000 | 300-800 |
NB615 L3 | 60000 | 108 | 3000 | 300-1000 |
Our planetary gearbox, wheel drive gearbox, winch drive gearbox, and track drive gearbox can be alternatives to Bosch Rexroth gearboxes
GFT13W2 | GFT17W2 | GFT17W3 | GFT24W2 | GFT26W2 | GFT36W3 | GFT40W2 |
GFT50W3 | GFT60W3 | GFT80W3 | GFT110W3 | GFT160W3 | GFT220W3 | GFT330W3 |
The NB600L gearbox can be alternative to Trasmital Bonfiglioli
601R | 603W | 605W | 606W | 609W | 611W | 613W 615W |
Product Quick Detail:
- Standard and non-standard available
- With high quality and competitive price
- Prompt delivery
- Packing as per customer’s demand.
We promise will offer the best price by the high quality in china! We also accept special order about the products. If you are interested in our products. Please do not hesitate to let us know.We are pleased to give you the detailed information.We promise that our products would be safety and were in high quality and reasonable price. If you are interested in our products, please contact us asap.We are sincerely looking for your cooperation.
Most of our products are exported to Europe or Americas, both standard and nonstandard products available. We can produce as per your drawing or sample. Material can be standard or as per your special request. If you choose us, you choose reliable.
Materials Available
1. Stainless Steel: SS201, SS303, SS304, SS316, SS416, SS420
2. Steel:C45(K1045), C46(K1046),C20
3. Brass:C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200(CuZn37), C28000(CuZn40)
4. Bronze: C51000, C52100, C54400, etc
5. Iron: 1213, 12L14,1215
6. Aluminum: Al6061, Al6063
7.OEM according to your request
Surface Treatment
Annealing, natural canonization, heat treatment, polishing, nickel plating, chrome plating, zinc plating,yellow passivization, gold passivization, satin, Black surface painted etc.
Processing Method
CNC machining, punch,turning, milling, drilling, grinding, broaching, welding and assembly
QC & Certificate
Technicians self-check in production,final-check before package by professional Quality inspector
ISO9001:2008 , ISO14001:2001,ISO/TS 16949:2009
Package & Lead Time
Size: Drawings
Wooden Case/Container and pallet, or as per customized specifications.
15-25days samples. 30-45days offcial order
Port: Shanghai/Ningbo port